Metalguard® Terry Cloth (1885)

Metalguard terry cloth gloves offer cut and heat protection for handling metal parts. The loop in design will not snag on parts like a typical loop out terry glove does. The thickness of the glove provides the added protection to the palm when handling the heavier parts, and will absorb the oils on the parts.

Other Metalguard gloves and sleeves are available in different weights for parts handling as well as different lengths for arm protection.

This product is currently out of stock and unavailable.


  • Terry cut resistant glove construction
  • Additional reinforcement in thumb crotch increases wear life and durability
  • Cotton fibers offer additional comfort and allow absorption of oils and grease
  • Loop-in design prevents snagging
  • ANSI Abrasion Level 3
  • ANSI Cut Level A6
  • Prewashed, preshrunk
  • Ambidextrous
  • Sold by dozen pair
Size Part Number Size Overedge Color
Large 1885L Metalguard<sup>®</sup> Terry Cloth (1885) 2


Metalguard<sup>®</sup> Terry Cloth (1885) 3

  • Remove all large particles.
  • Rinse with cold water then machine wash in warm water with mild detergent or soap for 10-15 minutes.
  • Water temperature should not exceed 160ºF (71ºC).
  • Rinse in cold water.
  • Tumble dry for 10-15 minutes, not exceeding 150ºF (67ºC).
  • Steel Processing
  • Metal Handling
  • Metal Stamping
  • Metal Fabricating
  • Metal Framing